Page 4 of 12 SC-1002/1012-10 Installation Instructions
3/27/07 CP4997A
INSTALLATION
Proper installation of the unit is essential for years of safe, reliable operation. Please read all
instruction before
installing the unit. Failure to follow these instructions can cause serious dam-
age to the unit or vehicle and may void warranties.
SAFETY PRECAUTIONS
For the safety of the installer, vehicle operator, passengers and the community please observe
the following safety precautions. Failure to follow all safety precautions and instructions may
result in property damage, injury or death.
Qualifications - The installer must have a firm knowledge of basic electricity, vehicle electrical
systems and emergency equipment.
Mounting - Mount the unit for easy access by the vehicle operator. DO NOT mount in air bag
deployment area. Assure clearances before drilling in vehicle.
Wiring - Use wiring capable of handling the current required. Make sure all connections are tight.
Route wiring to prevent wear, overheating and interference with air bag deployment. Install and
check all wiring before connection to vehicle battery.
Testing - Test all siren functions after installation to assure proper operation. Test vehicle opera-
tion to assure no damage to vehicle.
Keep These Instructions - Keep these instructions in the vehicle or other safe place for future
reference. Advise the vehicle operator of the location.
UNPACKING
Inspect contents for shipping damage. If found alert carrier immediately
. Contents should in-
clude unit, mounting bracket, amplifier mounting hardware, 6-Pos connector, and these instruc-
tions. The SC-1012 is also supplied with a remote panel containing switches, 10-Pos connector,
and 3/16” quick-connect terminals. Contact supplier immediately if any components are missing.
MOUNTING
The mounting bracket supplied can be installed above
or below the unit. Mounting bolts slide into channels
on each side of the case. Lockwashers should be
used between the case and bracket as well as be-
tween the bracket and nut. Choose a mounting loca-
tion convenient to the operator and away from any air
bag deployment areas. Inspect behind mounting area
for clearance. Assure adequate ventilation to prevent
overheating. Consider wire routing and access to
connections. Install mounting bracket to vehicle using
1/4" hardware (not supplied).
SC-1012: The remote panel of the SC-1012 is typically
mounted underneath the vehicle dashboard using
mounting hardware (not supplied). Mount the panel in
a location away from the driver’s or passenger’s legs.
Lockwashers
Nut
Channel
(from rear)
Bolt
Bracket
Sound Hazard
- Sound level from siren speaker (>120dBA @ 10 feet) may cause hearing damage.
Do not operate siren without adequate hearing protection for you and anyone in immediate vicinity.
(Ref. OSHA 1910.95 for occupational noise exposure guidelines)
(16 páginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais